TM
5-5420-226-20-2
POWERPLANT REPLACEMENT (Sheet 19 of 21)
47.
Remove coverings from air cleaner outlet
hose openings, one on each side.
48.
Position two air cleaner hoses (AA) (one
each side) over air cleaner outlet openings.
50.
Connect four electrical connectors (AC) (two
each side at top of powerplant).
NOTE
If your vehicle is equipped with a 2DA
engine do steps 50.1 and 50.2. If not,
proceed to step 51.
50.1. Slide hose (AC.1) and clamp (AC.2)
up over manifold tube (AC.3).
50.2. Using screwdriver, tighten clamps
(AC.2).
Go on to Sheet 19.1
Change 2