TM 5-5420-226-20-2
POWERPLANT REPLACEMENT (Sheet 15.1 of 21)
Check that powerplant is correctly
14.
seated. Check all clearances around
powerplant.
Remove four sling chain hooks from
15.
four lifting eyes of powerplant.
Install washer (A), recessed washer
16.
(B), lockwasher (C), and bolt (D) (both
sides).
Using 1-1/2 inch socket and torque wrench,
17.
tight-en bolt (D) securing transmission
mounting bracket to 370-375 lb-ft (501-
508 Nom).
Have second technician hold universal joint
18.
with final drive guide adapter.
Using pinch bar, pry final drive adapter
19.
away from final drive into universal
joint (each side).
Fit quick-disconnect ring (E) around
20.
final drive adapter.
GO on to Sheet 16
5-16.1/5-16.2 blank)
Change 4