TM 5-5420-226-20-2
THERMOSTATIC TRANSMISSION OIL COOLER VALVE ASSEMBLY (LEFT SIDE)
TEST AND REPLACEMENT (Sheet 3 of 7)
REMOVAL:
Place rags under tube end fittings (A and B)
1.
on transmission.
NOTE
It may be necessary to hold adapters
(C and D) with 1-5/8 inch wrench
while removing tube end fittings (A
and B).
2.
Using 1-1/2 inch wrench, remove tube end
fitting (A) from adapter (C).
Place rags under tube end fittings (E
3.
and F) at oil cooler.
NOTE
It may be necessary to hold adapters
(G and H) with 1-5/8 inch wrench
while removing tube end fittings
(E and F).
Using 1-1/2 inch wrench, remove outside
4.
tube end fitting (E) from adapter (G).
Displace tube (J).
5.
Using 1-5/8 inch wrench, remove adapter
6.
(G).
Using 1-1/2 inch wrench, remove tube
7.
end fitting (F) from adapter (H).
TA107497
Go on to Sheet 4
6-27
