TM
5-5420-226-20-2
ENGINE OIL COOLER REPLACEMENT (Sheet 6 of 6)
Using 3/4 inch socket and torque wrench tighten
18.
valve (M) to no more than 150 lb-in. (17 Nm).
Install new washer on screw (N).
19.
Using 1/2 inch socket, install screw (N).
20.
Check engine oil level indicator gage rod.
21.
Replenish lubricating oil lost during oil cooler
22.
r e p l a c e m e n t . (LO 5-5420-226-12)
Connect engine for powerplant ground hop
23.
Start and run engine. Check for oil leaks at
24.
oil cooler and line connections.
Shut down engine. Disconnect engine from
25.
powerplant ground hop (page 5-25).
Install engine shroud (page 9-31).
26.
27.
Install powerplant (page 5-14).
End of Task
TA107494
6-24