TM 5-5420-226-20-2
ENGINE OIL COOLER REPLACEMENT (Sheet 5 of 6)
Using 1/2 inch socket with extension
10.
through harness and into bracket, install
two lockwashers and screws (E).
Using 1/2 inch wrench, install oil cooler vent
11.
hose (F). at top of cooler.
Remove plastic material and masking tape
12.
from ends of hose (G) and oil cooler connector
(H).
Using 1/2 inch socket, install three screws
13.
(J) securing gasket and oil cooler connector
(H) to oil cooler.
Using 1-1/2 inch wrench, install hose (G) at
14.
oil cooler connector (H).
15.
Remove plastic material and masking tape
from ends of hose (K) and oil cooler connector
(L).
16.
Using 1/2 inch socket, install three screws
(M) securing gasket and oil cooler connector
(L) to oil cooler.
Using 1-1/2 inch wrench, install hose (K) to
17.
oil cooler connector (L).
Go on to Sheet 6
6-23