TM 5-5420-226-20-2
ENGINE OIL COOLER REPLACEMENT (Sheet 4 of 6)
INSTALLATION:
Place oil cooler and oil cooler screen mounting
1.
bracket into place on oil cooler frame.
2.
Start threads of four screws with lockwashers
(A) by hand to hold oil cooler in place.
3.
Using 3/4 inch wrench, tighten screws (A).
4.
Lift screen into place onto oil cooler.
5.
Start threads of four screws with lockwashers
(B) by hand to hold oil cooler screen in place.
6.
Using 1/2 inch socket, tighten screws and
lockwashers (B).
7.
Lift starter cable mounting
bracket (C) into place at top
of oil cooler.
8.
Start threads of four screws
with lockwashers (D) by hand.
Using 1/2 inch wrench, tighten
9.
screws and lockwashers (D).
Go on to Sheet 5
TA107492