TM 5-5420-226-20-2
UPPER OIL FILLER TUBE REPLACEMENT (Sheet 2 of 4)
3.
Using 1/2 inch socket, remove two screws
4.
Using 5/16 inch wrench on nut of clamp (F)
loosen clamp.
5.
Slip clamp (F) off hose (G).
Pull tube assembly (H) loose from hose (G)
6.
and remove tube assembly.
Using screwdriver, release spring (J) from
7.
cap assembly (K). Remove spring.
NOTE
If screws (L) cannot be loosened using a
screwdriver, clamp screw with visa grips
and loosen screw with vise grips and
screwdriver.
Using screwdriver, remove two screws (L)
8.
and remove cap assembly (K).
Remove packing (M) from under lip of cap
9.
assembly (K).
Using putty knife under plate (N) remove two
10.
drive screws (P), flat washers (Q), and plate
(N).
TA107554
Go on to Sheet 3
6-85