TM 5-5420-226-20-2
FUEL PUMP-TO-FUEL-WATER SEPARATOR HOSE ASSEMBLY REPLACEMENT (Sheet 2 of 5)
REMOVAL:
1.
Place drain pan under manual drain
valve (A).
2.
Open manual drain valve (A) by
turning valve handle to left.
3.
Using 7/16 inch wrench, turn fuel-
water separator bleeder cap (B)
to the left until loose.
FUEL WATER
SEPARATOR
4.
Allow fuel in fuel-water separator filter
(C) to drain through manual drain
valve (A).
Using 7/16 inch wrench, turn fuel-water
5.
separator bleed cap (B) to the right
until snug.
6.
Close manual drain valve (A) by turning
valve handle to the right.
TA107626
Go on to Sheet 3
