TM 5-5420-226-20-2
FUEL LINE INSULATOR REPLACEMENT (Sheet 1 of 10)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Installation
Ratchet with 1/2 in. drive
TOOLS:
1/2 in. socket with 1/2 in. drive
1/2 in. combnation box and open end wrench (2 required)
5 in. extension with 1/2 in. drive
Remove top deck (page 16-21)
PRELIMINARY PROCEDURES:
Remove transmission shroud supports (page 9-2)
Remove engine shroud supports (page 9-39)
Remove cooling fans (page 9-55)
Remove engine shroud (page 9-30)
Remove cooling fan shroud (page 9-47)
REMOVAL:
1. Using two 1/2 inch wrenches, remove two bolts (A) and nuts (B) holding insulators (C) and
plate (D) to support (E). Remove insulator (C) and plate (D).
2. Using two 1/2 inch wrenches, remove insulator and plate (F), (G), (H), (J), and (K), same as
step 1 above.
Go on to Sheet 2
TA107647
