TM 5-5420-226-20-2
FUEL RETURN LINES REPLACEMENT (Sheet 1 of 10)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Cleaning and Inspection
Installation
TOOLS:
1/2 in. socket with 1/2 in. drive
7/16 in. combination box and open end
9/16 in. combination box and open
wrench
end wrench
3/4 in. combination box and open end
Ratchet with 1/2 in. drive
wrench
11/16 in. socket with 1/2 in. drive
15/16 in. combination box and open end
7/8 in. combination box and open
wrench
end wrench
Flat-tip screwdriver
1-1/4 in. open end wrench
Drip pan
Extension socket wrench, 1/2 in.
1/2 in. combination box and open end
drive, 5 in. long
wrench
1-1/8 in. open end wrench
SPECIAL TOOLS: Ground hop kit (Item 30, Chapter 3, Section I)
SUPPLIES:
Sealing compound (Item 24, Appendix D)
Sealing compound (Item 23, Appendix D)
PRELIMINARY PROCEDURES:
Remove powerplant (page 5-2)
Remove cooling fans (page 9-55)
Remove engine access covers (pages 6-107 and 6-112)
Go on to Sheet 2
TA107657