TM 5-5420-226-20-2
HOSE ASSEMBLY (TO PURGE LINE) REPLACEMENT (Sheet 2 of 3)
5.
Using 5/8 inch wrench onrushing (C)
and 1 inch wrench on coupler assembly
(E), remove bushing (C).
6.
Using 1 inch wrench on coupler assembly
(E) and 5/8 inch wrench on bushing (D),
remove coupler (E).
7.
Using two 5/8 inch wrenches, remove
bushing (D) from hose assembly (F).
Using two 5/8 inch wrenches, remove
8.
quick-disconnect (G) from bushing (H).
Using two 5/8 inch wrenches, remove
9.
bushing (H) from hose assembly (F).
CLEANING AND INSPECTION:
1.
Using rags, clean hose assembly (F) and coupler assembly (E).
2.
Inspect hose assembly (F) and coupler assembly (E) for cracks and breaks. If damaged,
replace hose assembly (F) and coupler assembly (E).
Go on to Sheet 3
TA107790
7-183