TM 5-5420-226-20-2
HOSE ASSEMBLY (TO PURGE LINE) REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
1.
Using two 5/8 inch wrenches, install bushings (A) and (B) in hose assembly (C).
2.
Using tw0 5/8 inch wrenches, install quick-disconnect (D) onto bushing (A).
3.
Using 5/8 inch wrench on bushing (B)
and 1 inch wrench on coupler assembly
(E), install coupler assembly (E) onto
bushing (B).
4.
Using 1 inch wrench on coupler assembly
(E) and 5/8 inch wrench on bushing (F),
install bushing (F) into coupler assembly
(E).
Position assembled hose assembly
5.
(G) to engine.
Install clamp (H) and nut (J)
6.
to engine.
7.
Using 5/8 inch wrench, install
bushing (F) to engine.
8.
Using 9/16 inch wrench, tighten
nut (J).
Install powerplant (page 5-14).
9.
End of Task
TA107791
7-184