TM 5-5420-226-20-2
FUEL-WATER SEPARATOR FLUID PRESSURE FILTER ASSEMBLY REPLACEMENT (Sheet 2 of 7)
REMOVAL:
1.
Place drip pan under manual drain valve (A).
2.
Open manual drain valve (A) by turning valve
handle counterclockwise.
Using 7/16 inch wrench, turn bleed cap (B)
3.
counterclockwise until loose.
4.
Allow fuel in fuel-water separator filter
(C) to drain through manual drain valve (A).
5.
Using 7/16 inch wrench, turn bleed cap (B)
clockwise until snug.
Place drip pan under fuel-water separator
6.
filter (C).
Go on to Sheet 3
TA107817
7-210