TM 5-5420-226 -20-2
INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 1 of 5)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Inspection
Installation
TOOLS:
Automotive wrench
1-1/8 in. open end wrench
7/8 in. combination box and open end wrench
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
9/1 6 in. combination box and open end wrench
1 in. combination box and open end wrench
1-1/4 in. open end wrench
Vise
7/16 in. socket with 1/2 in. drive
REFERENCE:
PRELIMINARY PROCEDURES: Remove
Drain fuel tanks
REMOVAL:
1.
Using 7/8 inch wrench to hold connector (A), use 1-1/8 inch wrench
on connector (B) and remove hose (C) from elbow (D).
2.
Using automotive wrench, remove elbow (D) from right fuel tank (E).
TA107852
Go on to Sheet 2