TM 5-5420-226-20-2
INTER-TANK SWING CHECK VALVE
REPLACEMENT (Sheet 5 of 5) - Continued
10.
Using 7/8 inch wrench, install elbow (K) to right fuel tank.
11.
Using 7/8 inch wrench to hold connector (L) and 1-1/8 inch wrench on connector (M),
install fuel line (N) to elbow (K).
12. Using 9/16 inch socket, install bracket (p) to hull using screw and washers (Q).
13. Install clamp (T) to hose (N).
14. Using 9/16 inch socket on screw (R) and 9/16 inch wrench on nut and washer (S), install
screw (R) and nut (S) through clamp (T) and bracket (P).
15. Tighten screw (R) and nut and washer (S).
16. Install powerplant (page 5-14).
17. Fill fuel tanks (TM 5-5420-226-10).
End of Task
TA107856
7-249
