TM 5-5420-226-20-2
MANIFOLD HEATER FUEL RETURN TUBE ASSEMBLY REPLACEMENT (LEFT AND RIGHT
BANK) (Sheet 5 of 7)
INSTALLATION:
NOTE
Coat pipe thread fittings with
sealing
compound
before
installation
1. Using both hands, carefully
push tube assembly (A) down
through lower engine cooling
shroud opening (B).
2. Using 9/16 inch wrench, install
line nut of tube assembly (A)
on elbow (C) at manifold heater
(D).
3. Install grommet (E) on tube assembly
(A) with flat side of grommet facing
toward front of engine.
Go on to Sheet 6
TA107887