TM 5-5420-226-20-2
ACCELERATOR THROTTLE LINKAGE REPLACEMENT (Sheet 4 of 9)
13.
Using scribe, mark location of clamp
(S) on rod (T).
14.
Using 1/2 inch wrench, loosen nut (U).
NOTE
Count and write down number of
turns needed to unscrew clevis
(L).
15.
Unscrew clevis (L) and nut (U) from
rod (T).
16.
Using 7/16 inch wrench, remove screw
(V) and lockwasher (W) from clamp (S).
17.
Remove clamp (S), spring (X), and flat
washer (Y) from rod (T).
18.
Using pliers, remove cotter pin (Z) from straight pin (AA).
19.
Remove straight pin (AA).
20.
Using 1/2 inch wrench, loosen nut (AB).
NOTE
Count and write down number of turns needed to unscrew clevis (AC).
21.
Unscrew clevis (AC) and nut (AB) from rod (T).
Go on to Sheet 5
TA108060
7-354