TM 5-5420-226-20-2
ACCELERATOR THROTTLE LINKAGE REPLACEMENT (Sheet 6 of 9)
INSTALLATION:
1.
Screw nut (A) onto connecting link (B).
2.
Screw clevis (C) onto connecting link (B). Rotate clevis (C) to number of turns recorded.
3.
Using torque wrench and crowfoot attachment,
tighten nut (A) between 6-8 lb-ft (8.13-10.84 N m)
while holding clevis (C) with pliers.
4.
Connect clevis (C) to bellcrank lever
(D). Insert straight pin
(E) into connected clevis
(C) and bellcrank lever (D).
Using pliers, install new cotter
5.
pin (F) to straight pin (E).
6.
Mount assembled linkage (G) to bracket (H).
7.
Inset straight pin (J) through bracket (H).
Using pliers, install new cotter pin (K) to straight pin (J).
8.
Go on to Sheet 7
TA108062