TTM55-5420-202-34 -2
M -5420-226-20
FUEL TANK (LEFT) REPLACEMENT (Sheet 12 of 16)
NOTE
Use spacer/washer as required for
proper clearance between fuel tank
and crew compartment floor.
19.
Secure lower rear mount (N) and ground
strap (P) to hull bracket (Q) using two
screws, washers, and nuts (R).
20.
Using 1/2 inch wrench and 1/2 inch
socket, tighten screws and nuts (R).
21.
Using 9/16 inch wrench, install ground
strap (P) to fuel tank (C) with washer
and screw (S).
22.
Check for 5/16 inch clearance between
fuel tank (C) and crew compartment
floor. Add spacers (U) if required in
lower rear mount (N) for correct clearance.
23.
Using two 15/16 inch wrenches, install
two rubber mounts and washers (V) to
fuel tank bracket (W) and hull bracket
(X) with screw, washers, and nut (Y).
24.
Using torque wrench and 15/16 inch crow foot,
torque nut (E) to 130-145 lb-ft (176-196
N.m).
25.
After tightening all mounts, recheck
clearance in steps 16 and 22 above. Readjust
for proper clearance as required.
Go on to Sheet 13
Change 6
7-4-99
3 35
