TM 5-5420-226-20-2
LEFT EXHAUST EJECTOR TUBE REPLACEMENT (Sheet 2 of 4)
3.
Using 9/16 inch wrench, remove and dis-
card six self-locking nuts (F) securing
ejector tube (G) to turbosupercharger.
4.
Remove ejector tube (G) and gasket (H).
Discard gasket.
5.
Using flat-tip screwdriver, remove clamp
(J) and packing (K) from ejector tube (G).
6.
Using cross-tip screwdriver and 5/16 inch
wrench, remove 11 screws (L), 22 flat
washers (M), 11 lockwashers (N), and 11
nuts (P).
7.
Remove insulation (Q and R) from ejector
tube (G).
ENGINE LEFT BANK
Go on to Sheet 3
8-22
Change 2
