TM 5-5420-226-20-2
(sheet 1 of 4)
RIGHT EXHAUST EJECTOR TUBE REPLACEMENT
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Installation
10 in. adjustable wrench
TOOLS:
No. 1 cross-tip screwdriver
9/16 in. open end wrench
7/8 in. combination box and open end wrench
5/1 6 in. combination box and open end wrench
Screwdriver, flat-tip, 1/4 in.
Lockwasher (11 required)
SUPPLIES:
Gasket
Self-locking nut (6 required)
Silicone compound (Item 32, Appendix D)
Remove powerplant (page 5-2)
PRELIMINARY
PROCEDURE:
REMOVAL:
Using adjustable wrench to hold elbow (A)
and using 7/8 inch wrench, disconnect nut
(B) from elbow (A).
Using flat-tip screwdriver, loosen
clamp (C).
ENGINE RIGHT BANK
Go on to Sheet 2
Change 2
