TM
5-5420-226-20-2
INTERMEDIATE SCAVENGER TUBE REPLACEMENT (Sheet 3 of 4)
Use twisting motion and separate inter-
6.
mediate scavenger tube (C) from cap
assembly (D) and hose (Q).
7.
Remove and throw away gasket (R)
from between intermediate scavenger
tube (C) and cap assembly (D).
Inspect hose (Q) for cracks and defects.
8.
Replace as required.
Remove clamp (N) from intermediate
9.
scavenger tube (C) and inspect for
defects. Replace clamp as required.
INSTALLATION:
Apply coat of silicone compound
1.
to inside of hose (A).
Position and install end of intermediate
2.
scavenger tube (B) into hose (A) and to
cap assembly (C).
Insert new gasket (D) between flange of
3.
intermediate scavenger tube (B) and
cap assembly (C).
Go on to Sheet 4
Change 2