TM 5-5420-226-20-3
MASTER CONTROL PANEL REPAIR (Sheet 41 of 73)
Minter Heater Switch, Hi-Lo Switch And Indicator Light Replacement (Sheet 2 of 8)
REMOVAL:
1. Using flat-tip screwdriver on screws (A)
and 11/32 inch wrench on nuts (B), remove
four screws (A), lockwashers (C), and
nuts (B) securing connector (D) to panel.
2. Remove connector (D) from panel and
position aside.
3. Using flat-tip screwdriver on screw (E)
and 11/32 inch wrench on nut (F), remove
four screws (E), lockwashers (G), and
nuts (F) securing connector (H) to panel.
4. Remove connector (H) from panel and
position aside.
Go on to Sheet 3
TA168729
