TM 5-5420-226-20-3
FIRE EXTINGUISHER RELAY AND MASTER RELAY CIRCUIT BREAKER REPLACEMENT
(Sheet 1 of 2)
TOOLS: 2 in. cross-tip screwdriver
Silicone compound (Item 32, Appendix D)
SUPPLIES:
PRELIMINARY PROCEDURE
Remove access plate on floor in commander's compartment
(page 17-9)
NOTE
Replace only defective cir-
cuit breaker. Fire extin-
guisher circuit breaker is
on right, closest to hull
wall.
REMOVAL:
1.
Remove two electrical connectors (A)
from circuit breaker (B) by palling out.
2.
Using screwdriver, remove two screws
(C) and lockwashers (D) setting circuit
breaker (B) to vehicle.
Go on to Sheet 2
TA168791
