TM 5-5420-226-20-3
INTERCONNECTING BOX ASSEMBLY REPAIR (Sheet 1 of 8)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Assembly
Flat-tip screwdriver
TOOLS:
5/16 in. open end wrench
11/32 in.open end wrench
7/16 in. open end wrench
5/8 in.open end wrench
Glyptol sealer (Item 39, Appendix D)
SUPPLIES:
Remove interconnecting box assembly(page 10-143)
PRELIMINARY PROCEDURE:
DISASSEMBLY:
Using screwdriver, remove four
1.
tapping-thread screws(A) securing
cover (B) to box assembly (C).
Remove cover(B) from box assembly
2.
Using 5/8 inch wrench,
3.
remove nut (D) from receptacle
assembly (E).
4. Remove two lockwashers (F) and
electrical terminal (G) from
receptacle assembly (E).
TA168794
Go on to Sheet 2
