TM 5-5420-226-20-3
INTERCONNECTING BOX ASSEMBLY REPLACEMENT (Sheet 1of 1)
TOOLS: 1 in. combination box and open end wrench
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Spanner wrench
REMOVAL:
1. Using spanner wrench remove two electrical
connectors (A) from box assembly (B).
2. Using 1 inch wrench, remove electrical
connector (C) from box assembly (B).
3. Using socket, remove two screws (D)
and lockwashers (E), securing box assembly
(B) to floor.
4. Remove box assembly (B).
ISTALLATION:
1.
Place box assembly (B) in position on floor.
using socket, install two screws (D) and lockwashers (E) securing box assembly
2.
--
(B) to floor.
3.
using 1 inch wrench, install electrical connector (C) on box assembly (B).
4 . using spanner wrench, install two electrical connectors
(A) on box assembly (B).
End of Task
TA168793
