TM 5-5420-226-20-3
FINAL DRIVE AIR PRESSURE RELIEF VALVE (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 1)
TOOLS:
7/16 in. combination box and open end wrench
SUPPLIES:
Clean rag (Item 65, Appendix D)
PRELIMINARY PROCEDURES: Remove transmission shroud (page 9-2)
REMOVAL:
1. Using wrench, remove air pressure valve (A) from installation hole (B) in drive
housing.
2. Inspect air pressure valve to insure that vent cap is free to move on valve. Replace as
required.
1NSTALLATION:
1. Using wrench, install air pressure valve (A) into installation hole (B).
2. Install transmission shroud (page 9-6)
TA169112
End of Task
