TM 5-5420-226-20-3
SHOCK ABSORBER UPPER MOUNTING BRACKETS REPLACEMENT (Sheet 1 of 2)
TOOLS: 1-5/16 in. socket with 3/4 in. drive
15/16 in. socket with 3/4 in. drive
Ratchet with 3/4 in. drive
Cutting torch
Welding torch
Grinding tool
SUPPLIES: Bushing (4 required)
TM 43-0139
REFERENCES:
TM 9-237
Remove shock absorber (page 14-91)
PRELIMINARY PROCEDURE:
REMOVAL
NOTE
Do step 1 for front bracket (A).
Do step 2 for intermediate or rear bracket (B or C).
1. Using 15/16-inch socket and ratchet, remove four screws (D) and lockwashers (E) securing
bracket (A).
2. Using 1-5/16-inch socket and ratchet, remove three screws (F) and lockwashers (G) securing
bracket (B or C).
3.
Using cutting torch, carefully burn away weld securing bracket (A, B or C) to hull.
Remove bracket (A, B or C).
4.
Go on to Sheet 2