TM 5-5420-227-24
ACCESSORI ES CON T ROL BOX REPAI R (She e t 1 of 8 )
PROCEDURE INDEX
PROCEDURE
PAGE
Disassembly
Assembly
TOOLS:
3/8 in. open end wrench
7/16 in. open end wrench
11/3 2 in. open end wrench
5/16 in. open end wrench
Flat-tip screwdriver
SUPPLIES:
Silicone compound (Item 7, Appendix D)
Lockwasher
Lockwashers (2 required)
Lockwashers (6 required)
Lockwashers (8 required)
Lockwashers (12 required)
PRELIMINARY
PROCEDURE:
Remove accessories
control box (page 3-7
DISASSEMBLY:
1.
Using flat-tip screwdriver, loosen two
screws (A) at bottom of angle bracket (B).
2.
Using flat-tip screwdriver and 3/8 inch
wrench, remove screw (C), flat washer (D),
lockwasher (E), and nut (F). Throw lock-
washer (E) away.
3.
Manually remove angle bracket (B).
4.
Using flat-tip screwdriver, remove two
screws (G) and lockwashers (H) from
utility outlet cover (J). Throw lock-
washers (H) away.
5.
Manually remove utility outlet cover (J)
with chain.
6.
Remove electrical connector (K) from
circuit breaker (L).
7.
Remove socket assembly (M).
G O on to Sheet 2
4-8