TM 5-5420-227-24
Section Ill. HYDRAULIC CYLINDERS AND RESERVOIR
OVERHEAD CYLINDER REPAIR (Sheet 1 of 6)
PROCEDURE INDEX
I
PAGE
PROCEDURE
TOOLS:
Ratchet with 3/4 in. drive
1-5/16 in. socket with 3/4 in. drive
Torque wrench with 3/4 in. drive (0 to 600 lb-ft capacity)
Spanner wrench with 0 - 6-1/2 in. span
Flat-tip screwdriver
4-9/16 in. cylinder rod wrench (stow right fender box)
Punch, drive pin 3/4 x 10 in.
Sledge hammer
Crowbar
" SUPPLIES:
Dry cleaning solvent (Item 15, Appendix D)
Rags (Item 12, Appendix D)
Masking tape (Item 18, Appendix D)
10/32 screw 1/2 in. long (4 required)
Packing assembly
Wiper ring (2 required)
Preformed packing
Spacer ring
Wooden block 2 in. x 2 in. by 12 in. long
Container (to catch fluid)
Lockwasher (10 required)
Two
PERSONNEL:
REFERENCES:
DISASSEMBLY:
1.
Place wooden block under overhead
cylinder (A).
TA170546
Go on to Sheet 2
4-70
