TM 5-5420-228-24
H Y DRAU LI C FLU I D FI LT ER ASSEM BLY REPAI R (She e t 1 of 8 )
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Cleaning and Inspection
Assembly
18 in. pipe wrench
TOOLS:
Hammer
9/64 in. socket head screw key (allen wrench)
1/4 in. socket head SCreW key (allen wrench)
Flat-tip screwdriver
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Slip joint pliers
15/16 in. open end wrench
Cotter pin
SUPPLIES:
Gasket
Preformed packings (3 required)
Rags (Item 12, Appendix D)
Dry cleaning solvent (Item 15, Appendix D)
Ring, wiper
Drive screws (4 required)
Lockwashers (8 required)
PERSONNEL: TWO
Remove filter assembly (page 3-208)
PRELIMINARY PROCEDURE:
DISASSEMBLY:
Using 1/4 inch screw key, remove plug (A)
1.
from cover (B).
2.
Using socket, remove four screws (C) and
lockwashers (D).
Manually remove cover (B) and attached
3.
parts as an assembly from housing (E).
Go on to Sheet 2
T A2 5 1 6 0 6