TM 5-5420-228-24
ACCESSORIES CONTROL BOX REPAIR (Sheet 4 of 8)
24.
Using flat-tip screwdriver, remove
two screws (AX) and lockwashers (AY).
25.
Manually remove switch assembly (Z).
26.
Using flat-tip screwdriver and 11/32
inch wrench, remove eight screws (AZ),
lockwashers (BA), and nuts (BB) from
four circuit breakers (BC).
27.
Manually remove four circuit
breakers (BC).
ASSEMBLY:
Place four circuit breakers (A, B, C, D)
1.
in position.
2.
Using flat-tip screwdriver and 11/32 inch
wrench, install eight screws (E),
lockwashers (F), and nuts (G).
3.
Place switch assembly (H)
in position.
4.
Using flat-tip screwdriver, install two
screws (J) and lockwashers (K).
TA251663
Go on to Sheet 5
