TM 5-5420-228-24
ACCESSORIES CONTROL BOX REPAIR (Sheet 1 of 8)
PROCEDURE INDEX
PROCEDURE
PAGE
Disassembly
Assembly
TOOLS:
3/8 in. open end wrench
7/16 in. open end wrench
11/32 in. open end wrench
5/16 in. open end wrench
Flat-tip screwdriver
SUPPLIES:
Silicone compound (Item 7, Appendix D)
Lockwasher
PRELIMINARY
PROCEDURE:
Remove accessories
control box (page 3-7
DISASSEMBLY:
1.
Using flat-tip screwdriver, loosen two
screws (A) at bottom of angle bracket (B).
2.
Using flat-tip screwdriver and 3/8 inch
wrench, remove screw (C), flat washer (D),
lockwasher (E), and nut (F).
3.
Manually remove angle bracket (B).
Using flat-tip screwdriver, remove two
4.
screws (G) and lockwashers (H) from
utility outlet cover (J).
5.
Manually remove utility outlet cover (J)
with chain.
6.
Remove electrical connector (K) from
circuit breaker (L).
7.
Remove socket assembly (M).
Go on to Sheet 2
TA251660
