Table 1. Operator Preventive Maintenance Checks and Services (PMCS) for Common Bridge Transporter (CBT)

OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES FOR COMMON BRIDGE TRANSPORTER

TM-5-5420-278-10 M85 Tank Chassis Transporting: for Bridge Armored-Vehicle-Launched Scissoring Type Class 80 Manual
Page Navigation
81

Table 1. Operator Preventive Maintenance Checks and Services (PMCS) for Common Bridge Transporter (CBT). ITEM TO NOT FULLY ITEM CHECK/ MISSION NO. INTERVAL SERVICE PROCEDURE CAPABLE IF: TM 5-5420-278-10 0014 00 0014 00-2 1 2 3 4 5 2 Before CBT hydraulics Check for obvious fluid leakage from hydraulic components and underneath vehicle. Any Class III fluid leak is noted. 1 Before LHS MODE SELECT switch (1), NO TRANSIT indicator (2), joystick (3), LHS ENGAGED indicator (4), and OIL WARNING indicator (5) a. Check for proper operation of LHS MODE SELECT switch by turning switch to AUTO position. b. Pull joystick to UNLOAD and raise LHS 1-2 ft (0.305-0.610 m). LHS ENGAGED indicator will light green and NO TRANSIT WHEN LIT indicator will light red. c. Push joystick to LOAD position. NO TRANSIT WHEN LIT indicator will go out. d. Turn LHS MODE SELECT switch to OFF. LHS ENGAGED indicator will go out. e. Check OIL WARNING indicator; light should remain out during LHS operations. b. Indicators do not activate. d. Indicator remains on. e. Indicator is on. WARNING Check for overhead power lines or other obstructions before attempting operation of the LHS. The LHS reaches a height of 22 ft 2 in. (6.7 m). Serious injury or death may result from contact with electric power lines. NOTE Perform HEMTT PMCS before performing PMCS for LHS and BAP. (Refer to TM 9-2320-279-10.)

Privacy Statement
Press Release
Contact