TM 5-5420-278-10
0013 00
0013 00-2
d. Procedure. This column explains what type of service, specific damage, or
defect is to be checked.
NOTE
The terms ready/available and mission capable refer to
the same staus: equipment is on hand and is able to
perform its combat mission. Refer to DA Pam 738-750.
e. Not Fully Mission Capable If. This column lists conditions that make the
equipment unavailable for use as a result of damage, missing parts, or improper
functioning that would represent a safety hazard. Do not accept or operate
equipment with a condition noted in the “Not Fully Mission Capable If” column.
REPORTING DEFICIENCIES
If any problem with the equipment is discovered while performing PMCS or
during operation that cannot be corrected at the operator’s level, it must be
reported. Refer to DA Pam 738-750 and report the deficiency on Equipment
Inspection and Maintenance Worksheet, DA Form 2404 or DA Form 5988-E.
SPECIAL INSTRUCTIONS
Preventive maintenance is not limited to performing the checks and services
listed in the PMCS tables.
WARNING
Skysol-100 cleaning solvent is combustible. Use
mechanical ventilation whenever product is used in a
confined space, is heated above ambient temperatures,
or is agitated. DO NOT use or store near heat, sparks,
flame, or other ignition sources. Keep container sealed
when not in use.
Contact with Skysol-100 cleaning solvent may cause
skin irritation. Use chemical-resistant gloves. In case
of skin contact, remove any contaminated clothing and
wash skin thoroughly with soap and water. Wash
contaminated clothing before reuse. Eye contact may
cause irritation, tearing, or blurring of vision. Use face
shield or goggles when eye contact may occur. In case
of eye contact, flush eyes with large amounts of water
for at least fifteen (15) minutes or until irritation
subsides. Inhalation may cause irritation to upper
respiratory passages. DO NOT have food or drink in
the vicinity.
EXPLANATION OF COLUMNS (Contd)
