TM 5-5420-278-10
0022 00
0022 00-6
LOADING BAY FROM GROUND (Contd)
WARNING
Always wear leather gloves when handling winch cable.
Failure to comply may result in injury to personnel.
The cable drum requires a minimum of four wraps of
cable for safety. Failure to comply may result in
damage to equipment or possible injury or death to
personnel.
r. While assistant maintains tension on winch cable (5), hold WINCH switch (3)
in OUT position until winch cable hook (4) can be connected to lifting lug (7),
then release switch (3).
s. With hook end up and facing toward rear of bay, connect winch cable hook (4)
to lifting lug (7). Ensure latch (6) is closed.
WARNING
All personnel must stand clear of transporter and bay
during lifting operations. Failure to comply may result
in injury or death to personnel.
CAUTION
If loading ramp bay from concrete or asphalt surface,
place a wood block under the tip of the inner ponton
ramp ends to prevent damage should ramp bay slide
forward while loading.
t. Hold MAIN FRAME switch (1) in LOAD position until slack is removed from
cable (5).
u. Release parking brake by pushing PARKING BRAKE control (8) in.
1
2
3
5
8
4
6
7
