TM 5-5420-278-10
0023 00
0023 00-2
UNLOADING BAY TO GROUND (Contd)
NOTE
Perform steps d and e if BAP winch hoses are not
connected to the LHS couplings.
d. Disconnect winch hoses (4) and (3) from stowage couplings (5) and (2), located
on winch frame bracket (1).
CAUTION
Ensure BAP winch hydraulic hoses are routed so that
they are free to move with the LHS hook arm, or
damage to hoses will result.
e. Connect winch hydraulic hoses (3) and (4) to LHS couplings (6) and (7), located
on LHS hook arm (8).
f. Position CBT so that rear of vehicle is approximately 5–6 ft. (1.5–1.8 m) from
where rear of bay is to sit on ground, apply service brake (11), move
transmission selector lever (10) to N (neutral), and pull PARKING BRAKE
control (9) out.
1
2
3
4
5
8
6
4
9
11
10
7
3
