TM 5-5420-278-24&P
0056 00
0056 00-2
TRAVEL LATCH AND RECEPTACLE MAINTENANCE (Contd)
NOTE
Removal and installation of travel latch and receptacle on ramp
and interior bays are performed the same way. Ramp bay is
shown.
TRAVEL LATCH REMOVAL
1.
Move lever (10) to open position.
2.
Remove two springs (7), spacers (6), and pin (5) from lever (10).
3.
Remove two cotter pins (1), washers (2), pin (3), and lever (10) from inner ponton mounting
brackets (4). Discard cotter pins (1).
4.
Remove two spring pins (8) from pin (9), and remove pin (9) from lever (10).
NOTE
Perform step 5 if replacing lever.
Note number of washers used on stopscrew for installation.
5.
Remove stopscrew (12) and washers (11) from lever (10).
RECEPTACLE REMOVAL
1.
Position lever (10) in open position, if not removed.
NOTE
Scribe marks on strike catches and inner ponton mounting
brackets for installation.
2.
Remove four nuts (24), lockwashers (23), plate (22), four screws (15), and strike catch (14) from
inner ponton mounting bracket (13). Discard lockwashers (23).
3.
Remove four nuts (19), lockwashers (20), plate (18), four screws (16), and strike catch (17) from
inner ponton mounting bracket (21). Discard lockwashers (20).
