TM-5-5420-279-10
3.14.2.1
Remove the retaining clips and the locking pins securing the crane stabilizer slide frame
in the stowed position on both sides of the crane.
3.14.2.2
Move the control lever (1), which operates the changeover valve, to stabilizer (A).
WARNING
CRUSH HAZARD. BEFORE LOWERING CRANE STABILIZER LEGS ENSURE PERSONNEL
ARE STANDING CLEAR OF THE STABILIZER FEET. FAILURE TO HEED THIS INSTRUCTION
COULD LEAD TO SERIOUS INJURY TO PERSONNEL.
3.14.2.3
Operate the stabilizer control (2) adjacent to the stabilizers and extend the crane stabilizer
legs outwards from the stowed position.
3.14.2.4
Release the appropriate controls when the stabilizers are fully extended (2).
3.14.2.5
Extend the stabilizer leg cylinder until the steel wire rope is taut. Movement (A).
WARNING
CRUSH HAZARD. NEVER REMOVE THE CRANE STABILIZER LEG PIN UNTIL THE CABLE IS
TAUT. FAILURE TO OBSERVE THIS INSTRUCTION COULD RESULT IN SERIOUS INJURY OR
DEATH.
3.14.2.6
Remove safety pin (1) and retaining pin (2).
3.14.2.7
Remove locking pin (3).
