TM-5-5420-279-10
WARNING
CRUSH HAZARD. DEATH OR PERSONAL INJURY CAN RESULT IN THE EVENT OF A
SUSPENDED LOAD FALLING FROM THE CRANE. DO NOT STAND CLOSE TO LOADS
SUSPENDED FROM THE CRANE.
Operate the crane controls on the crane and position the bridge module lifter above
the approach ramps located on flatrack T1.
WARNING
CRUSH HAZARD. DEATH OR PERSONAL INJURY CAN RESULT IF THE CORRECT
PROCEDURE IS NOT FOLLOWED FOR ATTACHMENT OF THE BRIDGE MODULE LIFTER
TO THE RAMP MODULE.
4.9.4.8
Connect the bridge module lifter to the four lifting rings on the upper approach ramp
frame and connect two tag lines.
4.9.4.9
Operate the crane controls on the crane to lift the approach ramps and position them
on flatrack V1.
4.9.4.10
Remove the four transport aids located between the deck units of the ramp module
and stow in flatrack stowage box.
FRONT
POSITION 1
REAR
POSITION 2
686A593a
Ramp frame Transport Aid
4.9.4.11
Disconnect the bridge module lifter and tag lines, from the approach ramp frame.
NOTE
When placing the bridge module lifter on the ramp module, ensure that the lifting hooks do
not slip between the gaps separating the deck units.
4.9.4.12
Operate the crane controls on the crane to move the bridge module lifter, to the home
bank ramp module located on flatrack T1, attach lifting slings at POSITION 2 and tag
lines to the module handles. Lower the bridge module lifter onto the ramp module.
4-73
