TM-5-5420-279-10
10.10.3.1
Remove the four Nyloc nuts (3), plain washers (4) and bolts (5).
10.10.3.2
Remove the shootbolt bracket (6). Discard the Nyloc nuts (3).
10.10.3.3
Unscrew pin (1) from shootbolt (2).
10.10.3.4
Remove shootbolt (2) from bracket (6).
10.10.4.1
Examine all components for damage and corrosion.
10.10.4.2
Examine the bolts (5) for damage to bolt heads and threads.
10.10.4.3
Replace components as required.
10.10.5.1
Locate the shootbolt (2) in the bracket (6). Ensure the top of the shootbolt (2) is
aligned with its locating hole in the dowel.
10.10.5.2
Apply thread-locking compound to thread of pin (1). Align the threaded hole in
shootbolt (2) with slot in the bracket (6) and screw, pin (1) into shootbolt (2).
10.10.5.3
Tighten pin (1).
10.10.5.4
Position the shootbolt bracket (6) on the bridge module and secure the bracket using
bolts (5), plain washers (4) and new Nyloc nuts (3).