TM-5-5420-279-10
3, 7, 13, 15
686A668
4
Insert the two A-frame hinge-locking pins and 'R' clips on each side.
5
Remove the A-frame upper ladder by removing the 'R' clip in the pivot pin,
support the weight of the ladder, undo and release retaining strap, remove the
pivot pin, lift ladder clear, replace pivot pin in the ladder, replace R- clip in pivot.
6
Remove both folding walkway ladders, remove the R-clip in the pivot pin,
support the weight of the ladder, undo and release retaining strap, remove pivot
pin, lift ladder clear, replace pivot pin in the ladder, replace R-clip in pivot pin.
Repeat for other side.
7
Rotate the A-frame leg: Press A-frame rotate DEPLOY button on the interface
panel, insert the shootbolts at the position used to hold mudguards on the
vehicle.
8
Remove A-frame stabilizer leg 'R' clips and pins.
9
Lower the stabilizer legs to the ground using controls at center of A-frame lower
cross member, do not apply load to legs.
11-53
