TM-5-5420-279-10
WARNING
POWER SUPPLY CONNECTION OR DISCONNECTION.
ENSURE HYDRAULIC AND
ELECTRICAL SYSTEMS ARE SWITCHED OFF WHEN CONNECTING OR DISCONNECTING
HYDRAULIC COUPLINGS AND ELECTRICAL CONNECTORS. FAILURE TO HEED THIS
INSTRUCTION COULD LEAD TO SEVERE INJURY TO PERSONNEL.
NOTE
Protect open coupling and plugs against the entry of dirt during transport, contamination
or damage to plugs and systems may result.
4
Disconnect the hydraulic plug-in couplings.
5
Disconnect the electrical harness from the vehicle main junction box, remove
any cable ties to the truck chassis, and roll back and secure to the tail lift.
6
Disconnect the electrical harness from both the solenoid valves, remove any
cable ties to truck the chassis and roll back and secure to the tail lift.
7
Disconnect the electrical harness from the rear light cluster, remove any cable
ties to truck the chassis and roll back and secure to the tail lift.
WARNING
CRUSH HAZARD. NEVER USE FINGERS TO PUSH PINS IN OR OUT OF HOLES. SERIOUS
PERSONAL INJURY WILL RESULT IF THIS INSTRUCTION IS NOT OBSERVED.
8
Using the forks of the forklift truck, support the tail lift.
9
Remove the swing cylinder pivot pins on both sides. Secure the cylinders to the
tail lift to avoid damage during lifting or stowing for transport.
11-48
