TM-5-5420-279-10
11.8.7.1
To remove the launch frame from the launch vehicle for rail or air transport proceed
as follows:
NOTE
The numbers on the figures refer to the Sub Paragraph numbers of the text.
1
Remove the 'R' clips securing the removable mudguards, release the shootbolts
and remove the mudguards.
LOCATION OF A-FRAME
ROTATE SHOOTBOLT
WARNING
CRUSH HAZARD. NEVER USE FINGERS TO PUSH PINS IN OR OUT OF HOLES. SERIOUS
PERSONAL INJURY WILL RESULT IF THIS INSTRUCTION IS NOT OBSERVED.
2
Remove the two A-frame hinge locking pins and 'R' clips from each side-leg.
3
Unfold the A-frame by pressing the A-frame fold deploy button on interface
panel.
