TM-5-5420-279-10
686A814b
Figure 11. 105 Plan View of Flatrack T1 strapping
NOTE
When ramp modules are positioned directly onto a flatrack the jaw end of the ramp must
face rearwards.
11.15.2.1
Install buffer to flatrack wall/hookbar (see Figure 11. 116).
11.15.2.2
Fit four bottom location pieces, one at each corner, into convenient stake pockets of
the flatrack. Place a ramp module on to the flatrack using the location pieces as a
guide, positioning the module as close to the buffer as possible.
CORNER LOCATION PIECE
Corner Location Piece Fitted to Flatrack
11.15.2.3
Fit three transportation straps along each side of the module and tighten using the
11.15.2.4
Fit a diagonal transportation strap at each end of the ramp module and tighten using
the ratchets.
11-113
