TM 5-5420-280-10
0014 00
UNLOADING PALLET TO GROUND (Contd)
CAUTION
HIGH IDLE switch must be in OFF position prior to
engaging PTO. Failure to comply may result in damage to
vehicle transmission or LHS.
15. With HIGH IDLE switch (10) in OFF position, turn PTO ENGAGE switch (8)
to ON position. PTO ENGAGE indicator (9) will light.
16. Turn HIGH IDLE switch (10) to ON position.
WARNING
When NO TRANSIT WHEN LIT indicator is illuminated,
CBT may be maneuvered in the immediate vicinity of
loading/unloading site, but should not be driven on the
open road. Failure to comply may result in damage to
equipment and possible injury or death to personnel.
All non-essential personnel must stand a minimum of 15 ft
(4.6 m) away from pallet and bridge during unloading
operations. Failure to comply may result in injury or death
to personnel.
Do not crawl under or place hands or arms under pallet
when positioning dunnage under pallet. Failure to
comply may result in serious injury or possible death to
personnel.
NOTE
The LHS ENGAGED indicator will light up when joystick
is held in the LOAD or UNLOAD position.
Placing dunnage under bridge pallet frame is
recommended if pallet will be stowed on ground for an
extended period of time.
It may be necessary to momentarily lower fixed axles in
order to remove retaining pins.
17. Hold joystick (7) in UNLOAD position until LHS hook arm (11) moves
pallet (12) rearward, and longitudinal girders of pallet (12) contact ground. The
NO TRANSIT WHEN LIT indicator (6) will light.
10
9
11
12
8
13
0014 00-7
