TM 5-5420-280-10
0014 00
UNLOADING PALLET TO GROUND (Contd)
CAUTION
Ensure transload rollers and transload roller bar have been
removed from pallet prior to unloading pallet to ground.
Failure to comply may result in damage to equipment.
8. Remove two transload rollers from fixed axles and stow in pallet toolboxes.
Refer to WP 0007 00.
NOTE
Perform step 9 if transload roller bar is installed on
lower support boom.
9. Remove transload roller bar from lower support boom and stow in either pallet
toolbox. Refer to WP 0007 00.
10. Loosen jamnut (2) and hold-down bar (1) on both sides of pallet, and disconnect
hooks (3) from CBT towing shackles (4).
2
1
4
3
11. Place both hold-down bars (1) in stowed position on pallet cleats (5).
1
5
0014 00-4
