TM 55-1945-205-10-4
0023 00 2
0023 00
4.
Remove right forward nut (5) from bolt (6) on trailer drawbar hand crank.
5.
Position and install electric wire clamp (7) and trailer wire harness (8) to hand crank bracket with nut (5) and
bolt (6).
6.
Remove nut (9) and washer (10) on right hand side of trailer drawbar, behind drawbar eye (11).
7.
Position wire clamp (12) and trailer light harness on bolt and install nut (9) and washer (10).
8.
Remove bolt (13) and nut (14) from lower pulley bracket.
9.
Remove lower pulley (15).
10. Thread cable (16) on pulley (15), replace pulley (15) and secure with nut (14) and bolt (13).
11. Thread cable (16) around upper pulley (17) and back to lower cable bracket.
12. Remove quick release pin (18) from lower cable pulley bracket.
13. Position cable end loop (16) and attach with quick release pin (18).
14. Connect drawbar eye (11) to towing pintle of fork lift truck.
1
3
4
2
17
18
14
15
13
16
6
5
7
8
11
10
9
12
