TM 55-1945-205-10-4
0024 00 3/4 blank
0024 00
10.
11. Install Tee bolt (8) into under side of dunnage mat (4).
12. Install 5 5/8 in. diameter washer (9) on top of dunnage mat (4) over threaded Tee bolt.
13. Install 1 in. nut (10) to hold Tee bolt in place.
14. Install Tee bolt (8) into the ISO corner fitting (7).
15. Turn Tee bolt (8) 1/4 turn, hold against bottom upper surface of corner fitting (7) and finger tighten nut (10).
16. Using Tee handle (11), tighten nut (9).
17. Repeat above procedure for remaining corners and dunnage mats.
END OF WORK PACKAGE
11
10
9
8
7
4