TM 55-1945-205-24-2
0321 00 5/6 blank
0321 00
INSPECT RHIB ENGINE FUEL TANK
1.
Inspect fuel tank for cracks or deterioration. If found, replace tank.
2.
Check subcomponents for wear or damage. If found, replace component.
ASSEMBLE RHIB ENGINE FUEL TANK
1.
Install new lens seal (13) and lens (12) in lens retainer (11).
2.
Position lens retainer (11) on manifold assembly (5) and secure with three screws (10). Tighten screws (10).
3.
Install indicator (9) on manifold assembly (5).
4.
Install new o-ring (8) on end of fuel conduit hose (7).
5.
Install fuel conduit hose (7) on manifold assembly (5).
6.
Position new seal (6) on fuel tank (2).
7.
Install manifold assembly (5) and subcomponents into fuel tank (2) and secure with four screws (4). Tighten
screws (4).
8.
Install new gas cap gasket (3) into gas cap (1).
9.
Install gas cap (1) on fuel tank (2).
END OF WORK PACKAGE
